PDA

Ver la Versión Completa : El Prometheus S80 es "Swiss Made" (que quede claro)



Jordiher
24/09/11, 09:42
Buenos días.

Sé que los que estáis por aquí sabéis a ciencia cierta que la mayor parte de los relojes de la marca Prometheus son "Swiss made" y que el Prometheus S80, así lo va a ser también. Parece que algunos confunden el término, y por éso quería dejar clara esta cuestión.

Para ello me remito a este hilo que publiqué hace unos dos años, en los que se explican las condiciones para que un reloj pueda llevar la inscripción (o sello de garantía) "SWISS MADE" o "SWISS".

(Swiss Made)/(Swiss) Un reloj es suizo si: (http://(Swiss Made)/(Swiss) Un reloj es suizo si:)


(Lo reproduzco a continuación):

Reloj suizo

Sólo cuando es de Suiza, un reloj puede llevar la indicación "Swiss made" o "Swiss", o cualquier otra expresión que contenga la palabra "Suiza" o su traducción, en el exterior. De acuerdo con el punto 1 OSM, un reloj se considera suizos si:

* Su movimiento es suizo;
* Está ensamblado en Suiza;
* El fabricante lleva a cabo la inspección final en Suiza (o, como el caso de Prometheus, también el montaje del reloj).

Movimiento suizo

Como hemos visto, para ser suizo, un reloj debe utilizar un movimiento suizo. De acuerdo con la Sección 2 de OSM, un movimiento se considera suizo si:

* Se ha montado en Suiza;
* Ha sido inspeccionado por el fabricante en Suiza, y
* Los componentes son de fabricación suiza al menos en el 50 por ciento del valor total, sin tener en cuenta el coste de montaje.

Si el movimiento cumple con estas condiciones, pero el reloj no se monta en Suiza, la indicación "Swiss" puede ser colocada en alguno de los componentes del movimiento. En el exterior del reloj sólo puede aparecer la indicación "Mouvement suisse" o "Swiss made". Sección 3 § 3 OSM exige que la palabra "movimiento" aparezca en su totalidad y que esté escrita en el mismo tipo de letra, mismo tamaño y color que la palabra "Swiss".

Aquí tenéis más información de la garantía "Swiss Made":

Federation de l'Industrie Horlogère suisse FH (http://www.fhs.ch/en/swissm.php)

En conclusión:
¿Puede llevar la etiqueta de D.O. Rioja un vino del Penedés?

P.S. Si sólo el movimiento es suizo, pero la fabricación y acabados se hacen en otro país, nunca podrá llevar la inscripción "Swiss Made" en el reloj.

pepeliza
25/09/11, 03:41
En este hilo se explicó y se debatió el tema:
http://www.relojistas.com/threads/8554-%C2%BFHay-alguna-diferencia-entre-la-grabaci%C3%B3n-quot-Swiss-quot-y-quot-Swiss-Made-quot?highlight=swiss+made

pepeliza
26/09/11, 15:25
Copio esta interesantísima página de la Federación de la Industria Relojera Suiza en la que quedan perfectamente claros todos los conceptos.



A general overview






http://www.fhs.ch/images/swissmade.gif Watches, clocks and alarm clocks manufactured in Switzerland bear the designation "Swiss made" (or its abbreviation "Swiss") as well as the logo of the producer or distributor. This label ("place of origin" in legal terms) enjoys a solid reputation throughout the world. And globalization of trade has done nothing to diminish its importance. On the contrary, the modern consumer is looking for a maximum of information when he or she goes shopping for a new timepiece.
What lies behind this reputation ?
What does a label like this mean for the consumer ?
"Swiss made" embodies a concept of quality that has been forged over the years. It includes the technical quality of watches (accuracy, reliability, water-resistance and shock-resistance), as well as their aesthetic quality (elegance and originality of design). It covers both traditional manufacturing and new technologies (micro-electronics).
The Swiss are not the only watchmakers to manufacture high-quality timepieces and are consequently faced with strong competition. However, thanks to their unique infrastructure and to their know-how and spirit of innovation, they have succeeded in maintaining their leading position.
The intrinsic value of the "Swiss made" label, therefore, is the result of considerable efforts on the part of watchmaking companies, who are ultimately responsible for maintaining its reputation.
While prestigious brand names have thrived, they have never relegated the "Swiss made" label to a secondary place. The brand names and "Swiss made" have always worked together in an alliance that provides the consumer with the best of guarantees.
It is hardly surprising that this asset whets the appetite of counterfeiters. "Swiss made" has to be constantly protected on every market. Providing this protection is one of the principal tasks of the FH which conducts an on-going battle through legal and administrative channels to thwart anyone abusing the "Swiss" name. The weapons used in this battle are the laws of each of the countries concerned, backed by international agreements (bi-lateral treaties signed by Switzerland with several European countries and multi-lateral conventions drawn up by the World Intellectual Property Organization and by the World Trade Organization - TRIPS agreement -).
Recognizing that it must set the example, Switzerland has already reinforced the legal instruments at its disposal. The new law on "the protection of brand names and place of origin", passed on 28 August 1992, introduced more severe punishments. The Swiss customs authorities, for their part, keep a vigilant eye on all imports, exports and merchandise in transit.
Moreover, a law "regulating the use of the name 'Swiss' for watches" sets out the minimum conditions that have to be fulfilled before a watch merits the "Swiss made" label.
http://www.fhs.ch/images/swissmade2.gifThis law is based on a concept according to which Swiss quality depends on the amount of work actually carried out on a watch in Switzerland, even if some foreign components are used in it. It therefore requires that the assembly work on the movement (the motor of the watch) and on the watch itself (fitting the movement with the dial, hands and the various parts of the case) should be carried out in Switzerland, along with the final testing of the movement. It also requires that at least 50% of the components of the movement should be manufactured in Switzerland.
Certain regions in Switzerland have their own "place of origin" labels. One of the most renowned is "Genève", which identifies top-quality timepieces made in the city and canton of Geneva. Like "Swiss made", this label is very popular with counterfeiters and therefore benefits from continuous protection within the framework of the FH's anti-counterfeiting programme.
The Swiss watch industry is very active in safeguarding the integrity of "Swiss made" and its other regional labels of quality.
The vigilant consumer can also play an effective supporting role. By choosing reputable sales points and not being tempted by deals that are as dubious as they are outlandish, he or she will help to thwart counterfeiters, protect his or her own interests and contribute to the defence of fair trading.
The FH and its regional representatives will be happy to provide further information on this subject.









Legally speaking







Conditions for use (http://www.fhs.ch/en/swissm.php#2.)
Case (http://www.fhs.ch/en/swissm.php#boite)


A Swiss watch (http://www.fhs.ch/en/swissm.php#2.)
"Swiss Quartz" indication (http://www.fhs.ch/en/swissm.php#swissquartz)


A Swiss watch movement (http://www.fhs.ch/en/swissm.php#2.2)
"Swiss parts" indication (http://www.fhs.ch/en/swissm.php#swissparts)


Material extent of the use of the word "Swiss" (http://www.fhs.ch/en/swissm.php#3.)
Role of the FH (http://www.fhs.ch/en/swissm.php#5.)


Wristlet (http://www.fhs.ch/en/swissm.php#bracelet)












Conditions for use





A Swiss watch
Only when it is Swiss, may a watch carry the indications "Swiss made" or "Swiss", or any other expression containing the word "Swiss" or its translation, on the outside. According to Section 1a OSM, a watch is considered to be Swiss if:


its movement is Swiss;
its movement is cased up in Switzerland;
and the manufacturer carries out the final inspection in Switzerland.

A Swiss watch movement
As we have seen, to be Swiss, a watch must use a Swiss movement. According to Section 2 OSM, a movement is considered to be Swiss if:


it has been assembled in Switzerland;
it has been inspected by the manufacturer in Switzerland; and
the components of Swiss manufacture account for at least 50 percent of the total value, without taking into account the cost of assembly.

If the movement fulfills these conditions, but the watch is not assembled in Switzerland, the "Swiss" indication may be affixed to one of the components of the movement. On the outside of the watch, may then only appear the "mouvement suisse" or "Swiss movement" indication. Section 3 § 3 OSM requires that the word "movement" appear in full, and be written in the same type-face, of identical size and colour, as the word "Swiss".








http://www.fhs.ch/images/swissmov.gif
http://www.fhs.ch/images/swissmvt.gif


right
wrong








Material extent of the use of the word "Swiss"





The word "use" is understood in a broad sense: it not only covers the application of the above-mentioned designation to the watch, but also, according to Section 3 § 5 OSM:


the sale, offering for sale or putting into circulation of watches bearing such an indication;
the application of this designation to signs, advertisements, prospectus, invoices, letters or commercial papers.

Particular cases
Wristlet
The "Swiss made" indication may only appear on a wristlet if it is of Swiss manufacture and if the watch is also Swiss. A wristlet is considered to be Swiss if it has undergone an essential manufacturing operation in Switzerland and if 50 percent of the production costs originate in Switzerland.
When a Swiss wristlet is attached to a watch manufactured abroad, it may only bear a reference to the word "Swiss" if this designation clearly shows that only the wristlet is of Swiss manufacture (for example, "Swiss wristlet").
Case
The "Swiss case" indication on a watch case betokens that the case is of Swiss manufacture. A case is considered to be Swiss if:


it has undergone an essential manufacturing operation in Switzerland (stamping, turning, or polishing);
it has been assembled and inspected in Switzerland; and
over 50 percent of the manufacturing costs (excluding the value of the material) are due to operations carried out in Switzerland.

When the "Swiss case" indication appears on the outside of the case, and the watch is of foreign manufacture, the origin of the movement or of the watch must also be affixed to the outside of the watch.
"Swiss Quartz" indication
This indication is often illegally affixed to the outside of the watch, especially by foreign manufacturers wishing to show that the quartz movement used is of Swiss origin. But, according to the OSM, the use of this indication on the outside of the watch signifies that the watch is Swiss.
"Swiss parts" indication
This marking indicates that the movement is composed of movement-blanks which have been manufactured in Switzerland, but assembled abroad. This indication may only appear on the movement, and never on the outside of the watch.




Role of the FH





The FH has a double role in the protection of this indication of geographical origin;
firstly, the FH advises the companies on the lawful markings for watches and movements according to the Federal Council's Ordinance governing the use of the word "Swiss" for watches;
secondly it may act against companies which illegally use this indication, in order to protect the consumer, on the one hand, and, on the other hand, the renown of this designation, which is synonymous with quality.
If you have any questions about "Swiss made", please do not hesitate to contact a member of our Legal staff. (See also News (http://www.fhs.ch/en/news/))
Download the text of the Federal Council's Ordinance governing the use of the word "Swiss" for watches (http://www.fhs.ch/doc/osme.pdf)






Fuente: http://www.fhs.ch/en/swissm.php

SergioPB
27/09/11, 00:55
yo creo que da igual de donde sea el reloj, como si es made in albacete, lo importante es que sea bueno y si vosotros dais el visto bueno seguro que lo es.
Es que nose digo yo que si uno se compra el reloj es por que le gusta el diseño y el calibre.

pepeliza
27/09/11, 01:13
yo creo que da igual de donde sea el reloj, como si es made in albacete, lo importante es que sea bueno y si vosotros dais el visto bueno seguro que lo es.
Es que nose digo yo que si uno se compra el reloj es por que le gusta el diseño y el calibre.

¿Que da igual??????????????????. Me parece que estás completamente perdido...

SergioPB
27/09/11, 01:26
¿Que da igual??????????????????. Me parece que estás completamente perdido...

Lo que quiero decir es que lo importante es que es un reloj del foro, que sera algo exclusivo y con vuestro sello, que tampoco es lo mas de lo mas que ponga swiis made o si?
Pero bueno lo importante es que es un reloj del foro.

pepeliza
27/09/11, 01:43
Lo que quiero decir es que lo importante es que es un reloj del foro, que sera algo exclusivo y con vuestro sello, que tampoco es lo mas de lo mas que ponga swiis made o si?
Pero bueno lo importante es que es un reloj del foro.

En fin... que ya te irás enterando. Estás out después de tu paréntesis.

SergioPB
27/09/11, 02:16
En fin... que ya te irás enterando. Estás out después de tu paréntesis.
Es muy posible, supongo que muchas cosas aun nose, si se lo que me gusta jeje, pero tampoco pretendia ofender ni nada e?
solo expresava lo que me parece mas importante, que es un reloj de relojistas :) pero sisi la calidad tambien es importante

jorgefde
27/09/11, 16:54
Es muy posible, supongo que muchas cosas aun nose, si se lo que me gusta jeje, pero tampoco pretendia ofender ni nada e?
solo expresava lo que me parece mas importante, que es un reloj de relojistas :) pero sisi la calidad tambien es importanteCreo que a lo que se refiere Jose Luis, es que es muy importante lo de Swiss Made, porque? pues poque indica que el reloj es suizo lo que le da al reloj un Stand mas alto, ya que los relojes en suiza son como os toreros en españa, son los mejores (aunque a ti y a mi nos guate Seiko jejeje) Por lo que parte de esa exclusividad de la que hablas, es que lleve ese Swiss Made

Un abrazo!

SergioPB
27/09/11, 18:15
Creo que a lo que se refiere Jose Luis, es que es muy importante lo de Swiss Made, porque? pues poque indica que el reloj es suizo lo que le da al reloj un Stand mas alto, ya que los relojes en suiza son como os toreros en españa, son los mejores (aunque a ti y a mi nos guate Seiko jejeje) Por lo que parte de esa exclusividad de la que hablas, es que lleve ese Swiss Made

Un abrazo!

Pues si teneis razon, aun que tambien me gustan algunos relojes suizos e? hay dos que... ufff

Jordiher
27/09/11, 18:23
Pues si teneis razon, aun que tambien me gustan algunos relojes suizos e? hay dos que... ufff
A que uno es éste:
http://www.relojistas.com/attachment.php?attachmentid=5712&d=1316602894

Si sabía yo que mi amigo de Can Tarradellas le iba a gustar.....

SergioPB
27/09/11, 18:31
A que uno es éste:
http://www.relojistas.com/attachment.php?attachmentid=5712&d=1316602894

Si sabía yo que mi amigo de Can Tarradellas le iba a gustar.....

siento desilusionarte pero son estos dos :D

pepeliza
27/09/11, 18:39
Pues para que pases un poco de envidia (insana, eso sí), Sergio.

5912

5913

5914

5915

SergioPB
27/09/11, 18:44
pueees es muy bonito si, es el liquid metal? no me importaria llevarlo :P

pepeliza
27/09/11, 18:47
pueees es muy bonito si, es el liquid metal? no me importaria llevarlo :P

Ni a mí... solamente lo tuve el tiempo justo de sacarle las fotos.

SergioPB
27/09/11, 18:50
Ni a mí... solamente lo tuve el tiempo justo de sacarle las fotos.

la verdad es que si a la larga me decido por un planet ocean nose si sera con chrono o sin, como nunca e tenido uno en las manos seguro que si me decido por un omega lo tendre claro tocando los dos modelos.

plor
09/10/11, 20:05
Creo que a lo que se refiere Jose Luis, es que es muy importante lo de Swiss Made, porque? pues poque indica que el reloj es suizo lo que le da al reloj un Stand mas alto, ya que los relojes en suiza son como os toreros en españa, son los mejores (aunque a ti y a mi nos guate Seiko jejeje) Por lo que parte de esa exclusividad de la que hablas, es que lleve ese Swiss Made

Un abrazo!

pues opino igual,si me parece importante que esté realizado en Suiza,aparte de darle "caché",(eso no se puede negar),supongo que como en otros campos que conozco mas,las exigencias de acabado y calidad son mas altas,recuerdo equipos japoneses yaesu y su homólogo somercamp en suiza,siempre los suizos venian mejor ajustados y eso era conocido en todo el mundo,y los escojíamos a pesar del sobreprecio suizo,asi que algo habrá......

Bulubaslot
09/10/11, 23:53
Que bonito ese Zenith. Está en mi lista de los de "alguna vez, quizás"...

SergioPB
16/10/11, 10:43
Que bonito ese Zenith. Está en mi lista de los de "alguna vez, quizás"...

Si la verdad es que Zenith se lo esta currando.

pero por su precio.. cada dia veo mas claro que si tuviera el dinero para gastarlo elegiria el ananta spring drive de mi firma :)